GG Modifier for Lead Rope Solo (LRS) with a GriGri

No more drilling needed!The GG Modifier is a glue-on accessory that secures your GriGri in the held-upright position, designed specifically for Lead Rope Solo climbing. By adding a secondary attachment point with a breaking strength of 40-60 kg, this modification offers an ideal angle for solo climbing with a GriGri.

Compatible Devices:

• Petzl GriGri+
• GriGri (2019 version)
• GriGri 2
• NEOX

This accessory allows you to use your GriGri for Lead Rope Solo (LRS) climbing without altering the device permanently. Its also removable, so you can return your GriGri to its original state anytime.

Safety Notice:
Important:Petzl officially prohibits using the GriGri and NEOX for Lead Rope Solo[here]. Attempting to use these devices for LRS can be dangerous. The GG Modifier does not enhance their safety for solo climbing. Proper training is cruciallearn LRS from experienced professionals, always use a backup, and never rely on a single device for your safety.

Features:

• Durable and strongfor reliable use
• No drillingrequiredpreserves the GriGris integrity
• Optimized anglefor Lead Rope Solo climbing
• Doesnt interferewith normal belaying or rappelling
• Field-serviceablethe string is easily replaceable if needed
• Reversible modificationcan be removed to restore the GriGri

Check out Bliss Climbing’s instructional videos below for setup guidance. Dont risk learning LRS through trial and errorget proper training! For expert advice, explore Bliss Climbings online courses[here].

Compatibility and Specifications

One model shape (curved) is compatible with Petzl Grigri Plus, Grigri (2019), Grigri 2, and NEOX. The other model shape (flat) is compatible with the Grigri 1.

Specifications:

• Materials:3D-printed in lightweight yet durable PETG.
• Weight:Only 6.6 grams, making it both strong and easy to carry.
• Cord Strength:Breaks at 40-60 kg.
• Modifier MBS (Minimum Breaking Strength):100 kg.

Rigorous Testing:

• Temperature Range:Tested for durability in temperatures from -20C (-4F) to 40C (105F).
• Heat Endurance:Withstood 2 hours at 85C (185F) to simulate extreme heat, such as in a hot car, with no damage (although we recommend not leaving gear in such conditions).
• UV Resistance:PETG construction provides strong resistance to UV, ensuring years of consistent performance.

Proudly Made in Qubec

Aquaseal+FD Adhesive Instructions

Aquaseal+FD is a moisture-curing adhesive. For optimal results when using it with the GG Modifier, allow a 24-hour curing time.

To keep the unused portion from hardening in the tube, follow these steps:

1. Eliminate Air Pockets:Squeeze Aquaseal to the tube opening to remove any air pockets.
2. Seal the Threads:Apply a small amount of Vaseline on the threads before screwing on the cap. This creates an additional barrier against moisture.
3. Store Properly:Place the sealed tube in a zip-lock bag and store it in the freezer.

When Youre Ready to Reuse Aquaseal:Simply let the tube warm to room temperature, or submerge it (still in the zip-lock bag) in warm water. Its now ready for easy application!